FAQ

Magicbox FAQ ---the device can`t log in to the web of management page 1. Please check that the device network is connected properly and the light status of the device's network port is normal. In generally, the green light is on and the orange light flashes. 2. What is the IP ...

IRD1518Plus Config Biss Biss Key details: Find BISS on web,click “Add” 2.There have two mode,MODE-1 and MODE-E 3.If you only have one biss key,select MODE-1,Burned key need keep off. When the key is 12 digit,just insert the key to SW. When the key is 16 digit,converted into 12 di ...

ISDB-T VCT Config （ ex.TV show 45.1 ） Virtual channel number format Display format ： XX. W Z XX range is 0-99,Professional name is Key ID W range is 0-3, Z range is 1-8 WZ professional name is Logic Channel Number(LCN),the max value is 38 WZ(LCN) cannot be set 09,10,19,20,29,30 S ...

Escandinavia:Norway, Sweden, Finland, Denmark ...

Input device IP(This is mangement IP),click “OK” 2.Click port 1,click the right mouse button,SetChannel,the channel is which one you need config.For example,the DCM770,it have 5 output channel,the channel A is the 1st output. 3.Click NIT,click the right mouse button,Add Data 4.Cl ...

Support about 80 HD/SD programs (Bitrate:2Mbps) When HTTP/RTP/RTSP/HLS is converted into UDP (Multicast), the actual application shall prevail, and suggest maximum 80% CPU utilization. This means how many channels can work on our device,it depend on the CPU not over 80%. Manageme ...

when turn on device,it show this page,please open the cover,check whether the device accessories fall off Check whether the battery and memory have fallen off Connect the monitor and keyboard and mouse to the device,Turn on device,press Delete or Del enter BIOS set startup item A ...

NIT Insert ： 1. upload the two NIT file to the DCM700(Mux setting---> Manual PSI Inserter ) 2. Set right Output TS Index,Bitrate set 30 3.Manual PID Map,NIT PID is 0x10(16),Input PID and Output PID need same 4.Click Mux Setting--->Nit Edit,set OFF 5.Output TS,the NIT, set O ...

Mux Setting--->Output Server Edit--->TS 001,NIT Interval Set ON,remember TS ID and ON ID Mux Setting--->NIT Edit,Click Add The TS ID and ON ID need same with Output TS,Frequency is the modulator frequency. Mux Setting--->NIT Edit,Enable set ON More details contact sal ...