IPM6000I Set VCT

ISDB-T VCT Config（ex.TV show 45.1）

Virtual channel number format

Display format：XX.WZ

XX range is 0-99,Professional name is Key ID

W range is 0-3,Z range is 1-8

WZ professional name is Logic Channel Number(LCN),the max value is 38

WZ(LCN) cannot be set 09,10,19,20,29,30

Such as:05.15 is right format,05.19 is wrong format.

1. Click the button “TS Config”,Click one of the output program,the LCN insert 1(it is the 1 of the 45.1) ,Then click “Apply”(Each ts ,the program number cannot be same)

   
   

   

2.TS Config--->General--->NIT,NIT Insert select “From web”,Click “Apply”(Each ts need insert NIT)

3.TS Config--->General--->Stream,remember TS ID and ON ID

4.Modulator,remember each TS Frequency and Guard Interval and FFT Mode.

5.TS Config--->General--->NIT,Click “+”

6.“Key ID” insert 45(it is the 45 of 45.1),TS ID and ON ID must the same with the Stream side.The Frequency set the same with output TS modulator Frequency.

Note:Each output TS,Only can set one Key ID,so you can set output TS1 is 45.1,45.2,45.3,output TS2 is 46.1,46.2,46.3;Or TS1 is 45.1,45.2,45.3,TS2 is 45.4,45.5,45.6.

 

Program number cannot be modified directly, its value is calculated by LCN through rules.

More details contact sales:

John Pan

Sales Manager

DIBSYS Technologies Co., Ltd

--------------------------------------------------------------------------------

Web: www.dibvision.com

Tel: +86-571-87068982 Fax: +86-571-89714580

Mobile: +86 13957196036 What's App: +86 13957196036 Skype: dibdvb